Coastal Eco Heating & Air provides professional system inspections services to Houston residents and businesses. Fast response, fair pricing, guaranteed satisfaction.
Real jobs completed by our team in the Houston area
Matthew
September 2026
Matthew found that the coil was frozen due to the old factory install filter. As he pulled the filter, he noticed that the return plenum was falling apart and that the entire plenum needed to be replaced. He came back the next day, removed the old return plenum, installed a new plenum, and sealed everything up.
Matthew checked system pressures and confirmed the system was cooling well.
Jan 21, 2026 · 6 min read
After a hurricane or major storm, your first instinct is to get the AC running again. But turning on a damaged HVAC system can cause thousands in additional damage. Here's what to inspect first.
Read article
Dec 27, 2025 · 9 min read
Even if your HVAC seemed fine after flooding, water damage shows up years later through corroded connections, contaminated ductwork, and weakened compressors. Here's what Friendswood and Galveston homeowners need to know.
Read article
Jan 12, 2026 · 8 min read
A tune-up checks your equipment. An HVAC Performance Review evaluates your entire system: ductwork, insulation, airflow, and efficiency. Here's why the difference matters on the Gulf Coast.
Read articleMore ways we can help in Houston.
Answered by our licensed technicians serving Houston.
A standard inland inspection checks refrigerant charge, electrical components, airflow, and mechanical operation. Our coastal inspection adds a full salt corrosion assessment (documenting corrosion stage at every metal surface), condensate and humidity evaluation (Gulf Coast systems produce two to four gallons of condensate daily), and storm damage assessment. An inspection that misses these coastal-specific items checks half the risks and ignores the half that actually kills equipment early.
Quarterly for ongoing maintenance inspections. We also recommend a full inspection after any tropical storm or hurricane that affects Galveston County, even if your home and equipment appear undamaged. Hidden storm damage is one of the leading causes of premature system failure on the Gulf Coast. Systems that have gone more than six months without professional evaluation should be inspected as soon as possible.
Stage 1 is surface oxidation: white powder on aluminum, green patina on copper, surface rust on steel. Cleaning and treatment can halt it entirely. Stage 2 is active pitting: salt has penetrated beyond the surface, creating pinholes in fins and pits at copper joints. Targeted repair stops the spread. Stage 3 is structural degradation: fins are perforated, joints leak, hardware fails. Major component replacement is typically necessary at this point.
Yes. Debris can bend condenser fins on back and side surfaces not visible from outside. Salt water that reached the outdoor unit corrodes electrical components, the compressor, and the fan motor even after water recedes. Storm surge can shift the condenser pad, causing refrigerant oil pooling and compressor strain. Power surges damage control boards and capacitors with failures that may not appear for weeks.
Our comprehensive coastal inspection is $129 and includes the full salt corrosion assessment, condensate and humidity evaluation, storm damage check, and standard system performance testing. You receive a written report with photographs documenting every finding and clear recommendations prioritized by urgency. Maintenance plan members receive this as part of their quarterly schedule.
Licensed & Insured
Fully licensed and insured for your protection
24/7 Emergency
Available when you need us most
11+ Years
Over a decade of trusted service
